[INSTALLATION PRECAUTION]
CAUTION
z Use the PLC in an environment that meets the general specifications contained in CPU
module User's Manual to use.
Using this PLC in an environment outside the range of the general specifications may
cause electric shock, fire, malfunction, and damage to or deterioration of the product.
z When installing the module, securely insert the module fixing tabs into the mounting holes
of the base module while pressing the installation lever located at the bottom of the module
downward.
Improper installation may result in malfunction, breakdown or the module coming loose and
dropping.
Securely fix the module with screws if it is subject to vibration or shock during use.
Tighten the screws within the range of specified torque.
If the screws are loose, it may cause the module to fallout or malfunction.
If the screws are tightened too much, it may cause damage to the screw and/or the module,
resulting in fallout or malfunction.
z Completely turn off the externally supplied power used in the system when mounting or
removing the module.
Not doing so may cause damage to the module.
z Do not directly touch the conductive area or electronic components of the module.
Doing so may cause malfunction or failure in the module.
速中断模块 A1SI61
适配器 Q6DIN3
模块 A1SJ71ID2-R4
模拟量模块 AJ65BT-64DAI
RS-232C通讯用模块 FX2N-232IF
模块 AJ35PP-CNV-SI
模块 AJ35PP-CNV-GI
ID接口模块 QD35ID2
模块 AD35ID2
模块 A1SJ71ID1-R4
模块 A1SD32ID2
仿真单元 A6SIM-X64Y64
模块 AJ71ID1-R4
中断模块 QI60
模块 A1SD35ID1
模拟量输入模块 Q68ADV，Q68ADI
模块 AJ35PTC-CNV-GI
外部输入/输出单元 GT15-DIOR
AS-I主站模块 FX2N-32ASI-M
模拟量模块 AJ65VBTCU-68ADIN
模块 AD35ID1
模块 AJ35PP-CNV-GI
模拟量输出模块 A68DAI-S1
模块 AJ71ID2-R4
模块 A1SD35ID2
适配器 Q6DIN1A
电流输出模拟量模块 Q68DAIN
模块 AJ35PTC-CNV-GI
中继模块 AJ65BT-RPI-10A
电流输入模拟量模块 Q68ADI