CAUTION
Transport the products correctly according to their weights.
Stacking in excess of the specified number of products is not allowed.
Do not carry the servo motor by the cables, shaft or encoder.
Do not hold the front cover to transport the controller. The controller may drop.
Install the servo amplifier in a load-bearing place in accordance with the Instruction Manual.
Do not climb or stand on servo equipment. Do not put heavy objects on equipment.
The controller and servo motor must be installed in the specified direction.
Leave specified clearances between the servo amplifier and control enclosure walls or other equipment.
Do not install or operate the servo amplifier and servo motor which has been damaged or has any parts
missing.
Provide adequate protection to prevent screws and other conductive matter, oil and other combustible
matter from entering the servo amplifier and servo motor.
Do not drop or strike servo amplifier or servo motor. Isolate from all impact loads.
When you keep or use it, please fulfill the following environmental conditions.
Conditions
伺服驱动器 MR-J2S-100A4
伺服控制器 MR-J2S-22KA4
伺服驱动器 MR-J2S-22KB4
伺服控制器 MR-J2S-350A
伺服放大器 MR-J2S-100B
伺服控制器 MR-J2S-37KB
伺服放大器 MR-J2S-500A4
伺服控制器 MR-J2S-11KB
伺服放大器 MR-J2S-100B4
伺服驱动器 MR-J2S-37KA4
伺服驱动器 MR-J2S-20B
伺服驱动器 MR-J2S-55KA4
伺服驱动器 MR-J2S-60A
伺服控制器 MR-J2S-15KB
伺服放大器 MR-J2S-11KA4
CC-Link接口单元 MR-J2S-T01
伺服驱动器 MR-J2S-37KB4
伺服驱动器 MR-J2S-60B4
伺服控制器 MR-J2S-700B4
伺服控制器 MR-J2S-700A
伺服控制器 MR-J2S-15KA4
伺服放大器 MR-J2S-55KB4
伺服驱动器 MR-J2S-60A4
伺服驱动器 MR-J2S-10B
伺服驱动器 MR-J2S-10A
伺服驱动器 MR-J2S-30KB4
伺服放大器 MR-J2S-700A4
伺服控制器 MR-J2S-30KA
伺服放大器 MR-J2S-200B
伺服放大器 MR-J2S-45KB4