6) 5)
No. Name Usage
1)
Expansion cable
connector
A connector for signal transmission with the basic base
module or the other expansion base module. Connects the
expansion cable. Do not remove the supplied connector
cover.
2) Base cover PCB surface protection cover.
3)
Stage number
setting connector
A used to set the stage numbers of the expansion base
modules. Refer to section 4.2 for the setting procedure.
4) Module connector
Connector for mounting power supply unit, input/output unit
and special function module.
Mount the dustproof connector cover, blank cover unit
(AG60) or dummy unit (AG62) on the connector in the
spare spaces with module connected.
5) Module fixing hole Cut out to accept projection and hook at rear of modules.
6)
Screw hole for
fastening modules
A screw hole used for fastening a module to the base.
(M4 screw)
7)
Base module
installation hole
A hole used for mounting the base module to a panel such
as a control panel.
伺服控制器 MR-J2S-700B
伺服驱动器 MR-J2S-30KB4
伺服驱动器 MR-J2S-60A
伺服驱动器 MR-J2S-22KB4
伺服放大器 MR-J2S-11KA4
伺服电机 HC-MFS73BK
伺服控制器 MR-J2S-22KA4
伺服控制器 MR-J2S-350B
伺服驱动器 MR-J2S-60B4
伺服控制器 MR-J2S-30KA4
伺服放大器 MR-J2S-200A
伺服电机 HC-KFS053D
伺服电机 HC-MFS23BK
伺服控制器 MR-J2S-11KB4
伺服放大器 MR-J2S-70A
伺服驱动器 MR-J2S-40A
伺服放大器 MR-J2S-55KB4
伺服放大器 MR-J2S-500A4
伺服电机 HC-MFS43BK
伺服电机 HC-KFS43K
伺服驱动器 MR-J2S-15KB4
伺服放大器 MR-J2S-700A4
直流电抗器 FR-HEL-H37K
伺服控制器 MR-J2S-500A
伺服电机 HC-MFS23K
变频器 FR-A740-37K-CHT
伺服驱动器 MR-J2S-100A4
伺服电机 HC-KFS23K
伺服驱动器 MR-J2S-37KB4
伺服电机 HC-MFS053BD