CAUTION
• Use the PLC in an operating environment that meets the general specifications described in the
manual.
Using the PLC in any other operating environments may cause an electric shock, a fire or a
malfunction, or may damage or degrade the PLC.
• Before installing the module, securely insert the module fastening latch at the lower part of the
module into the installation hole on the base unit. (Q Series modules must be fixed to the base unit
with screws using the specified torque.)
If the module is not installed properly, it may cause the module to malfunction, fail or fall off.
• Tighten the installation screws within the specified torque.
If the screws are loose, it may cause the module to fall off or malfunction.
If the screws are tightened excessively, it may damage the screws and the module, and cause the
module to fall off or malfunction.
• Connect the reader writer cables securely to the connectors of the module. After connecting, make
sure to check that the cables are not loose.
If the cables are loose, poor cable connections may cause erroneous inputs and/or outputs.
• Do not directly touch the conducting parts and electronic parts of the module.
It may cause the module to malfunction or fail.
[WIRING PRECAUTIONS]
CAUTION
• Before starting any installation or wiring work, make sure to shut off all phases of the power supply
模块 A1SJ71ID2-R4
模块 AJ35PTC-CNV-GI
外部输入/输出单元 GT15-DIOR
适配器 Q6DIN3
模块 A1SD32ID2
模拟量输出模块 Q68DAV，Q68DAI
仿真单元 A6SIM-X64Y64
模块 A1SD35ID1
中断输入模块 QI60
模块 AD32ID1
中继模块 AJ65BT-RPI-10A
模块 AJ35PP-CNV-SI
模块 AJ35PTC-CNV-GI
中断模块 AI61
模拟量模块 AJ65VBTCU-68ADIN
模拟量输出模块 A1S68DAI
模拟输出模块 A616DAI
模块 AD32ID2
模拟量输入模块 Q68ADV，Q68ADI
模拟量模块 AJ65BT-64DAI
电流输出模拟量模块 Q68DAIN
模拟量输出模块 A68DAI-S1
模块 A1SD32ID1
适配器 Q6DIN1
适配器 Q6DIN2
电流输入模拟量模块 Q68ADI
速中断模块 A1SI61
转换适配器 FX2NC-CNV-IF
模块 AD35ID2
模块 A1SJ71ID1-R4