[Mounting Instructions]
!

CAUTION
Use the PLC within the general specifications environment given in this manual.
Using the PLC outside the general specification range environment could lead to electric
shocks, fires, malfunctioning, product damage or deterioration.
Always securely insert the module latches at the bottom of the module into the fixing holes on
the base unit. (Always screw the AnS Series module onto the base unit with the specified
torque.)
Improper mounting of the module could lead to malfunctioning, faults or dropping.
Securely connect the external device connection connector, SSCNET connection connector
and peripheral device connection connector into the module connector until a click is heard.
Improper connection could lead to a connection fault, and to incorrect inputs and outputs.
When not connecting the external device, always install a cover on the connector section.
Failure to observe this could lead to malfunctioning.
模块 AJ35PP-CNV-GI
模块 A1SJ71ID1-R4
模块 AJ35PTC-CNV-GI
模块 AJ35PTC-CNV-SI
模块 A1SJ71ID2-R4
适配器 Q6DIN2
模拟量输出模块 A616DAI
模块 AD32ID2
中继模块 AJ65BT-RPI-10B
模块 AD35ID2
适配器 Q6DIN1A
中断模块 AI61
模块 A1SD32ID1
模块 A1SD32ID2
模块 AD32ID1
外部输入/输出单元 GT15-DIOR
速中断模块 A1SI61
适配器 Q6DIN3
转换电缆 FX2N-CNV-IF
模拟输出模块 A616DAI
外部输入/输出单元 GT15-DIO
模拟量输出模块 Q68DAV，Q68DAI
模拟量输入模块 Q68ADV，Q68ADI
电流输出模拟量模块 Q68DAIN
模块 A1SD35ID2
适配器 Q6DIN1
RS-232C通讯用模块 FX2N-232IF
仿真单元 A6SIM-X64Y64
CCLink模块 AJ65BT-64DAI
转换适配器 FX2NC-CNV-IF